Filter
Top Products
SWITCHERS
11
11
CB4206MR
6 feet, 5-BNC M to 5-BNC M
CB4212MR
12 feet, 5-BNC M to 5-BNC M
CB4225MR
25 feet, 5-BNC M to 5-BNC M
CB4250MR
50 feet, 5-BNC M to 5-BNC M
CB4275MR
75 feet, 5-BNC M to 5-BNC M
CB42100MR
100 feet, 5-BNC M to 5-BNC M
CB42150MR
150 feet, 5-BNC M to 5-BNC M
SUPER HIGH RESOLUTION 5 BNC TO 5 BNC
COAXIAL CABLE
CB4400MR
Bulk cable (500 feet minimum)
CB4406MR
6 feet, 5-BNC M to 5-BNC M
CB4412MR
12 feet, 5-BNC M to 5-BNC M
CB4425MR
25 feet, 5-BNC M to 5-BNC M
CB4450MR
50 feet, 5-BNC M to 5-BNC M
CB4475MR
75 feet, 5-BNC M to 5-BNC M
CB44100MR
100 feet, 5-BNC M to 5-BNC M
CB44150MR
150 feet, 5-BNC M to 5-BNC M
HIGH RESOLUTION PLENUM-FLEX 5BNC-
5BNC COAXIAL CABLE
CB5000PL-
5BM00035BM
3 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM00065BM
6 feet, 5BNC M to 5-BNC M
CB500PL-
5BM00125BM
12 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM00255BM
25 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM00505BM
50 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM00755BM
75 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM01005BM
100 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM01505BM
150 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM02005BM
200 feet, 5BNC M to 5-BNC M
CB5000PL-
5BM02505BM
250 feet, 5BNC M to 5-BNC M
SUPER HIGH RESOLUTION PLENUM-FLEX 5-
CHANNEL COAX CABLE
CB5100PL –
5BM00035BM
3 feet, 5-BNC M to 5-BNC M
CB5100PL-
5BM00065BM
6 feet, 5-BNC M to 5-BNC M
CB5100PL –
12 feet, 5-BNC M to 5-BNC M
5BM00125BM
CB5100PL –
5BM00255BM
25 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM00505BM
50 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM00755BM
75 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM01005BM
100 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM01505BM
150 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM02005BM
200 feet, 5-BNC M to 5-BNC M
CB5100PL –
5BM02505BM
250 feet, 5-BNC M to 5-BNC M
TROUBLE SHOOTING GUIDE 10
•
Please make sure, that the input signal
formats are the same for the input (source)
and output (display).
•
Please make sure that the input signal
amplitude levels are as follows:
1. RED, GREEN, and BLUE are less than 10
V.
2. SYNC is less than 5.0 V and more than 0.3
V.
•
Please use the appropriate input voltage
110 VAC or 220 VAC.
•
Please make sure that proper quality of cables
is used. We recommended ALTINEX made
cables for the best results.
•
If a problem arises after continuous usage at
higher voltage, higher temperature, higher
humidity, or at other extreme environmental
conditions, please correct the problem.
•
If a problem exists with the switcher, please
reset the unit by pressing the RESET key for
more than 2 seconds
•
Make sure that all channels (inputs) are not
OFF (i.e. RED LED is not ON next to the ALL
OFF key).
•
If you are using any controllable software or
•
hardware to control the
MX2226AT
,
then first
verify operation of the unit using MX Control
software available from the ALTINEX web-site: