Filter
Top Products
BIOS Setup
AN9 32X 3-5
- Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature
exceeds the shutdown temperature limit, the system will shutdown automatically.
- Shutdown Temp.
This item sets the temperature that will shutdown the system automatically in order to prevent
system overheating.
- Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the
CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will
sound.
- Beep Temp.
This item selects the warning temperature limit.
※ The shutdown temperature must be set above the warning temperature.
Voltage Monitoring
Click <Enter> key to enter its submenu:
µGuru Utility V1.00
ABIT EQ
Voltage Monitoring
Reading Shutdown
Enable
Beep
Enable
High
Limit
Low
Limit
(*)CPU Core Voltage 1.40 V (*) (*) 1.60 V 0 V
(*)DDR2 Voltage 1.80 V ( ) (*) 2.20 V 1.50 V
(*)DDR2 VTT Voltage 0.90 V ( ) (*) 1.10 V 0.75 V
(*)HyperTransport Voltage 1.20 V ( ) (*) 1.45 V 0.95 V
(*)NB Voltage 1.20 V ( ) (*) 1.45 V 0.95 V
(*)CPU VDDA 2.5V Voltage 2.50 V ( ) (*) 3.00 V 2.00 V
(*)SB Voltage 1.50 V ( ) (*) 1.00 V 1.20 V
(*)ATX +12V (24-Pin Connector) 12.00 V ( ) (*) 14.40 V 9.60 V
(*)ATX +12V (4-Pin Connector) 12.00 V ( ) (*) 14.40 V 9.60 V
(*)ATX +5V 5.00 V ( ) (*) 6.00 V 4.00 V
(*)ATX +3.3V 3.30 V ( ) (*) 3.95 V 2.65 V
(*)ATX 5VSB 5.00 V ( ) (*) 6.00 V 4.00 V
↓↑
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
All Voltages
These items display the voltage of each element.
- Shutdown Enable
Use <Space> key to enable system shutdown function. If the voltage of corresponding element
is higher/lower than the high/low limit, the system will automatically shutdown.