Filter
Top Products
9
Supported Display Connections
To ensure the highest possible performance, only one display device is
supported when CrossFire™ is active. When CrossFire™ is active other
display devices connected to the other connections on both graphics cards
are rendered inactive.
If additional displays are required when CrossFire™ is active, use either
SurroundView™ (included on the installation CD, custom software install)
or an additional graphics card.
The graphics card provides hardware support for DVI-I and VGA
monitors, and HDMI™ HDTVs (using a DVI-to-HDMI™ adapter). It also
provides TV output via the S-Video (VIVO) connection in composite,
S-Video, and component TV formats.
The following table shows display configurations available when
CrossFire™ is not enabled.
ATI 9-Pin Cable for Video Input/Video Output
ATI 9-pin HDTV Output Cable
DMS-59-to-Two DVI-I Adapter Cable
Display Connections
Cathode ray
tube analog
display
• SVGA connection and VGA cable
• DVI-I connection and DVI-I-to-VGA adapter and VGA
cable
LCD display • DVI-I connection and DVI cable
• DVI-I connection and DVI-I-to-VGA adapter and VGA
cable