AMD PPC-L106T Computer Monitor User Manual


 
Chapter 1 General Information 3
2nd level cache: 128 KB on CPU
RAM: One 200-pin SODIMM sockets accept 256 ~ 1024 MB
DDR
PCI Bus Master IDE interface: Supports two connectors (one
internal, one external). Each connector supports two IDE
devices on two channels (PIO modes 3/4). BIOS supports IDE
(PIO mode 0~4, DMA mode 0~2, and Ultra DMA33 simulta-
neously). Default: CF Slot set as Master
Parallel port: One parallel port, supports SPP/EPP/ECP parallel
mode.
Serial ports: Four serial ports with three RS-232 ports (COM1, 3,
and 4), one RS-232/422/485 port (COM2). All ports with
16C550 compatible UARTs. Default COM4 reserved for Touch
USB: Supports four USB 2.0 (2 x internal, 2 x external)
PCI/ISA bus expansion slot: Accepts either one ISA or one PCI
bus card.
Watchdog timer: 256-level interval from 1 to 255 seconds.
Jumperless selection and software enabled/disabled.
Battery: 3 V @ 195 mA lithium battery for CMOS backup
Solid State Disk (SSD)
One 50-pin socket: for one CompactFlash™ Type II storage card,
shared with one IDE channel.
PCI SVGA/flat panel interface
Chipset: AMD CS 5536
Display memory: 1.5~4 MB share memory
Display type: Simultaneously supports CRT and flat panel displays
Display resolution: Supports non-interlaced CRT and LCD dis-
plays up to 800 x 600 @ 256 K colors with 1.5~4 MB shared
memory
Audio function:
Audio Chipset: ALC203, fully compliant AC 97 analog I/O com-
ponent, 16-bit stereo full-duplex codec, audio interface for
microphone-in, line-in and speaker out
PCI bus Ethernet interface