Filter
Top Products
14 PPC-L106T User Manual
Chapter 2 System Setup
2.1 General
The PPC-L106T consists of a PC-based industrial computer that is
housed in a protective cover. Your HDD, DDR RAM and power supply
and are all readily accessible by removing the rear panel. Any mainte-
nance or hardware upgrades can be carried out easily after removing the
rear panel.
2.2 Preparing For First Time Use
Before you set up the PPC-L106T system, you should have at least the
following items ready:
• Power cord (in the accessory box)
• PS/2 keyboard
• PS/2 mouse (for system software installation, i.e. MS Windows,
NT, etc.)
Warning! Do not remove the rear cover until you have
verified that no power is flowing within the PPC-
L106T. Power must be switched off, and the
power cord must be disconnected. Every time
you service the PPC-L106T, you should be
aware of this.