Filter
Top Products
18 PPC-L106T User Manual
2.4.5 Ethernet
The PPC-L106T is equipped with a high performance 32-bit Ethernet
chipset which is fully compliant with the IEEE 802.3 100 Mbps CSMA/
CD standards. It is supported by major network operating systems. It is
also both 100Base-T and 10Base-T compatible. The medium type can be
configured via the RSET8139.EXE program included on the utility disk.
The Ethernet port provides a standard RJ-45 jack. The network boot fea-
ture can be utilized by incorporating the boot ROM image files for the
appropriate network operating system. The boot ROM BIOS files are
combined with system BIOS, which can be enabled/disabled in the BIOS
setup.
2.4.6 USB ports
The external USB device may be connected to the system though the 4-
pin USB ports located on the rear side of the system unit.
The USB ports support hot plug-in connection. You should install the
device driver before you use the device.
2.5 Installing Software to the HDD
Installing software requires an installed HDD. Software can be loaded in
the PPC-L106T using any of four methods:
2.5.1 Method 1: Use the Ethernet
You can use the Ethernet port to download software to the HDD.
2.5.2 Method 2: Use a USB Disk or USB CD-ROM
You can use a USB disk or USB CD-ROM to download the software to
your HDD.
2.5.3 Method 3: Use the COM or parallel port
Connect another PC to the PPC-L106T with an appropriate cable and
transmit the software to the PPC-L106T.