Filter
Top Products
BIOS
- 26 -
Halt On
This field determines whether or not the system will halt if an error is detected
during power up.
All errors (default Whenever the BIOS detects a non-fatal error, the
system will stop and you will be prompted.
No errors The system boot will not be halted for any error that
may be detected.
All, But Keyboard The system boot will not be halted for a keyboard
error; it will stop for all other errors.
All, But Diskette The system boot will not be halted for a disk error; it
will stop for all other errors.
All, But Disk/Key The system boot will not be halted for a keyboard or
disk error; it will stop for all others.
)
3.4 Advance BIOS Features
Quick Power On Self Test
This BIOS feature allows you to decrease the time it takes to boot up the
computer by shortening or skipping certain standard booting procedures.
Setting: Disabled/Enabled (Default).
BIOS
- 27 -
First/ Second/Third Boot Device
These fields determine the drive that the system searches first for an
operating system. The options available include Setting:
Boot Other Device
It allows the system to search for an OS from other devices other than th
ones selected in the First/ Second/ Third Boot Device
Setting: Disabled/ Enabled (Default)
Boot Up NumLock Status
It allows you to activate the NumLock function after you power up the
system.
Setting: Off/On (Default).
Security Option
It allows you to limit access to the System and Setup.
When you select System, the system prompts for the User Password every
time you boot up.
When you select Setup, the system always boots up and prompts for the
Supervisor Password only when the Setup utility is called up.
Setting: Setup (Default)/System.
When a Cyrix 6x86/MII CPU is used, this option should be enabled to use
the MMX instructions. However, if you are using NetWare 5.0, you must
disable this option.
Setting: Disabled/Enabled (Default)
Floppy, LS-120, HDD-0, SCSI, CDROM, HDD-1, ZIP100,
USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN and Disabled.
e
.
.
Cyrix 6x86/MII CPUID
.