Filter
Top Products
3.9 SEG-M Installation (Plug On Module)
The SEG-M plug on module was created to allow HubMax and MiniMax panels an easier way to use the SEG-M functionality. When
used with HubMax or Hub MiniMax panels, no power or communication wiring is required between the SEG-M and the backplane.
All connections are made through the connector used to connect the SEG-M module to the backplane. To connect to a Max 3 or
MiniMax 3 you must use the supplied cable to make the connections to the module and the backplane.
3.9.1 SEG-M Diagram
The diagram below is a top view of the SEG-M for reference. Section 3.9.2 describes the connectors and their functions. Section 3.9.3
describes the LED indicators.
Page 12 of 34 Document Number: 6066005, Rev 3.2