Filter
Top Products
4.3.3 SEG Setup Menu
1. To change the IP address you should select option 0 server Configuration. A 3 digit number will be displayed in brackets.
This is the first 'octet' of the current IP address of this SEG device. You will either enter a new 3 digit number and then press
enter to accept it, or you can accept this number by pressing enter. You will do this for all 4 octets.
2. You must now press <ENTER> for the rest of the options to accept the default settings.
3. There is no need to change any other settings within this setup menu.
4. From the main menu, select 9 save and exit.
5. When you receive the Parameters stored ... message you can exit this utility by selecting File > Exit. You will select Yes if
you are asked if you want to disconnect.
NOTE: Default values in all other menu systems should. The default value is kept by pressing the <ENTER> key when that
setting is displayed.
Page 24 of 34 Document Number: 6066005, Rev 3.2