Filter
Top Products
Three-Phase Rack PDU — Installation and Operation Manual 1
Product Description and Inventory
Description
This manual provides information on installing and operating three Rack
PDUs (AP7601, AP7602, and AP7608), which mount vertically in the
rear channel of an APC NetShelter VX Enclosure.
Each of these PDUs has a sensor that measures the current being used by
the PDU and its attached devices. The display interface shows the
aggregate current of an individual phase. An alarm occurs if the
aggregate current is above the high threshold value or below the low
threshold values that you configure. These PDUs have the following
plugs and outlets:
Inventory
PDU Plug Number and Type of Outlets
AP7601 L21-20 42 NEMA 5-20R
AP7602 L21-20 21 NEMA 5-20R and 6 L6-20R
AP7608 L21-20 42 IEC-320-C13
Description Part Number Quantity
Serial cable 940-0144 1
Hardware end cap 870-70803 1
Hardware access cover 870-70804 1
Note: Bracket kits (AR8116BLK) are available for Rack PDUs.