Filter
Top Products
3 990-5518 03/02
Chapter 2 Installation and Maintenance
Only trained service personnel should install and maintain the Power Supply.
Prior to installing the Power Supply AC line voltage must be routed to the enclosure. Local, state,
federal and/or National Electric Code (NEC) regulations regarding location, permits and electrical
wiring must be adhered to.
Do not operate the Power Supply where the temperature and humidity are outside the specified
limits. See Specifications in this manual.
Unpacking
Inspect the unit upon receipt. Notify the carrier if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents. The package contains the Power Supply and product documentation.
SLG Enclosure SLP Enclosure
Models Supported
Model Number Description
CTSLGH220S1 ENCL, SLG, 36V, 220VAC, SM Ready
CTSLPH120S1 ENCL, SLP, 36V, 120VAC, SM Ready
CTSLPH220S1 ENCL, SLP, 36V, 220VAC, SM Ready
CTSLGH710S1 ENCL, SLG, 36V, 120VAC, SM Ready
Installing the Power Supply Enclosure
Use 2” conduit with an outer diameter of 2.5” (5.1 cm/6.4 cm). The mounting holes are 1/2” in
diameter.
Mounting Bracket