Filter
Top Products
Rack LCD Monitor Keyboard Mouse Installation 1
Preliminary Information
Safety Considerations
Warning: Mount the American Power Conversion (APC
®
) Rack LCD Monitor
Keyboard Mouse in the enclosure in a manner that avoids the hazards of an uneven
mechanical load.
Caution: If the LCD is mounted in an enclosed communications rack, the recommended
rack ambient temperature should be no greater than 113°F (45°C).
Caution: Install the LCD in a rack so that there is the correct amount of air flow required
for safe operation of the LCD.
Caution: Do not use the LCD as a shelf or place items on top of the LCD.
Electrical Hazard:
When connecting the LCD to the supply circuit, consider the effect
that overloading of circuits might have on over-current protection and supply wiring. See
the LCD nameplate ratings. Maintain reliable grounding of the LCD. Give particular
attention to any supply connections other than direct connections to the branch circuit
(e.g., use of power distribution units).
Note: Ensure that the LCD power cord can easily reach a power outlet.
Note: Select a power supply cord with an IEC-320 appliance coupler on one end and a
grounding-type attachment plug suitable for use in the country of application on the other
end. The power supply cord should be at least HO3-VV-F or HO3-VVH2-F and be
2-conductor plus ground and minimum of 0.75 mm
2
in cross-sectional area.