Filter
Top Products
3
B
ASIC CONNECTORS
serial com
Power management software and interface kits can be used with the UPS.
Use only cables approved by APC.
Any other interface cable will be incompatible with the UPS
connector.
normal bypass
Manual bypass enables the user to manually put connected equipment into
bypass mode.
EPO terminal
Emergency Power Off terminal allows the user to connect the UPS to the
central EPO system.
TVSS screw
The UPS features a transient voltage surge-suppression (TVSS) screw for
connecting the ground lead on surge suppression devices such as telephone
and network line protectors.
When connecting grounding cable, disconnect the unit from the utility
power outlet.
external battery
pack connector
External battery packs must be connected to these connectors located on
the rear panel of the unit.
5000/6000 VA models
output circuit
breakers
IEC 320-C13
10 A per
Receptacle
IEC 320-C19
16 A per
Receptacle