Filter
Top Products
990-1007A, Revision 2 9/99 2
Initial Inspection
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for
reuse or dispose of it properly.
Unpacking
Move the UPS, in its shipping package, as close to the desired location as possible. Then follow these instructions:
Use scissors or a knife to cut the
plastic straps and open the
package.
Refer to this User’s Manual
for safety information and
installation instructions.
Unpack all visible foam pieces
and the wooden unloading
ramp.
Lift off the cardboard box that
covers the top and sides of the
package. A wooden pallet
forms the bottom of the box.
Remove the carton liner. Unscrew the hold-down bolts
that secure the Smart-UPS DP
to the pallet.
Pull out the two (2) metal bars
and set aside.
Open the literature kit and
locate the two (2) metal pallet
brackets.
Insert the metal pallet brackets
into the holes on the unloading
ramp.
Attach the unloading ramp to
the pallet.
Have two (2) people, standing
on either side of the Smart-UPS
DP, wheel the unit down the
unloading ramp. Do not stand
in front of the UPS.