Filter
Top Products
MAX-CSE Web Interface
32
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Changing the Encoder Profile
1.
From the Stream Profiles page, select an option from the Profile drop-down menu. All but the
Custom option contain preset parameters.
2. If you selected the Custom option, select the appropriate options from the Video and Audio
sections.
3. If you wish to change the Stream profile, select between RTP and UDP in the Transport Protocol
drop-down menu.
4. Change the Target Address, Target Port, and Target Audio Port information, if necessary.
5. Set the SAP Settings:
6. To save your changes, click the Accept button. To return to the previously saved settings, click
Cancel.
A/V Set-up Page
The A/V Set-up page (FIG. 17) is accessed by clicking on the Audio/Video button in the Navigation Bar.
This page allows a user (with the proper access rights) to configure the properties associated with both
the incoming video and audio content.
FIG. 17 A/V Set-up page