AMX NXA-UPS1500 Power Supply User Manual


 
Battery Replacement
24
NXA-UPS1500 Uninterruptible Power Supply
Replacing the UPS Battery - Step Two
Remove the two screws that secure the Battery Compartment Cover (FIG. 22)
Replacing the UPS Battery - Step Three
Disconnect the four-pin power connector from the battery wiring harness from the power connector
inside the unit, and slide the battery tray out of the unit (FIG. 23):
Recycling the Used Battery
Contact your local recycling or hazardous waste center for information on proper disposal of the used
battery.
FIG. 22 Replacing the Battery - Step 2
FIG. 23 Replacing the Battery - Step 3