Filter
Top Products
Installing the PC Presenter
15
PC Presenter
Installing the PC Presenter
This section describes how to connect the AXR-MSE to the PC and to the Central Controller.
Before installation, check to verify that the Device DIP switch on the front panel of the AXR-MSE
is set correctly. Setting the Device DIP switch is described in the previous section (Setting the TXC-
MS(L) transmitter DIP switch section on page 7).
The PC Presenter can be set up for either stand-alone operation, or connected to a Central
Controller via AXlink for system-wide control. The following sections describe both set-up
scenarios.
Installing the PC Presenter for Stand Alone Operation
To use the PC Presenter as a stand-alone unit (not connected to AXlink), connect the AXR-MSE to
the PC keyboard and mouse. As a stand alone unit, the PC Presenter controls PC keyboard and
mouse functions. The following sub-sections describe connecting the PC Presenter for stand-alone
operation.
Step 1: Connecting the AXR-MSE to the PC keyboard and PC
To connect the AXR-MSE to the PC keyboard and PC:
1. Turn off your PC.
2. Disconnect the PC keyboard from the CPU.
3. Connect the PC keyboard cable to the bottom KEYBOARD connector on the rear panel of the
AXR-MSE.
4. Using the supplied keyboard cable, connect the keyboard connector on the CPU to the top
KEYBOARD connector on the AXR-MSE (labeled TO PC).
Step 2: Connecting the AXR-MSE to the PC mouse and PC
To connect the AXR-MSE to the PC mouse and PC:
1. Turn off your PC.
2. Disconnect the PC mouse from the CPU.
3. Connect the PC mouse cable to the bottom MOUSE connector on the rear panel of the
AXR-MSE.
4. Using the supplied mouse cable, connect the mouse connector on the CPU to the top MOUSE
connector on the AXR-MSE (labeled TO PC).
Step 3: Connecting an optional external IR sensor to the AXR-MSE
The AXR-MSE uses an optional external IR sensor to receive IR signals from the TXC-MS(L). To
connect an external IR sensor to the AXR-MSE, connect one or more optional IRX-SM+
swivel-mount IR receivers or IRX-DM+ IR receivers to the AXR-MSE as shown in FIG. 17.
The PC Presenter uses PS/2 style mouse and keyboard connectors.