AMX PC Presenter Mouse User Manual


 
Introduction
4
PC Presenter
AXR-MSE Wireless Mouse and Keyboard Controller
The AXR-MSE is the receiver/processor component of the PC Presenter. The AXR-MSE receives
RF or IR signals from the TXC-MS(L) transmitter using the attached RF receiving antenna or an
external IR sensor. The AXR-MSE connects between the PC keyboard and mouse cables, and the
keyboard and mouse ports on the PC CPU. The AXR-MSE uses a standard four-pin captive wire
AXlink connector to connect to an AMX Central Controller.
FIG. 4 Laser Radiation warning
AXR-MSE Specifications
Dimensions (HWD) 1.86" x 5.63" x 4.06" (4.72 cm x 14.29 cm x 10.31 cm)
Height with antenna: 5.49" (13.96 cm)
Depth with connectors - 4.06" (4.47 cm) and with antenna - 5.12" (13.00 cm)
Power 65 mA (max draw) @ 12 VDC
Enclosure Metal with black matte plastic
Receive frequency RF: 418 MHz standard (other frequencies are available)
Front Panel
AXlink Green LED indicates AXlink communication as follows:
Off indicates no power or the controller is not functioning properly
One Blink per Second indicates normal operation. Device numbers match the
programmed device numbers in the Axcess program on the master.
Full On indicates that there is no AXlink activity.
DIP switch 8-position sets the AXlink device ID
MOUSE LED Red LED indicates mouse data transmission activity
KEYBOARD LED Red LED indicates keyboard data transmission activity
DATA LED Red LED indicates RF or IR signal reception