Filter
Top Products
MasterSwitch Power Distribution Unit User’s Guide 29
Event-Related Menus and Options
Actions Option (Web Interface only)
Enabling and
disabling event
actions
Use the Actions option of the Events menu to enable or disable the
following for events that have a specified severity level:
• Events Log
•SNMP Traps
•Email
Some Management Card (system) events do not have a severity level,
and you cannot disable actions for those events.
Severity levels of
events
All MasterSwitch events and some Management Card events have a
default severity level of Severe, Warning, or Informational. See
Severity
levels defined on page 36
.
To use an evntlist.htm page to change the default severity level of an
event, see
How to Configure Individual Events on page 33.
Event Log action
Disable this action to prevent the logging of all events that have a
severity level. By default, all events are logged.
SNMP Traps action
By default, the SNMP Traps action is enabled for all MasterSwitch
events and for Management Card events that have a severity level
(informational, warning, or severe).
To u se
SNMP
traps for event notifications, you must first identify the trap
receivers (up to four) by their specific IP addresses. See
Trap receivers
on page 30
.
Email action
By default, the Email action is enabled for severe events only. To use
e-mail for event notification, you must first define the e-mail recipients.
See
page 31.
Related topics
See Event Log on page 27.
See
Management card events on page 37 and
MasterSwitch
events on
page 38
for a description and the default severity level (if any) for each
event.