APC AP9212 Switch User Manual


 
MasterSwitch Power Distribution Unit User’s Guide 33
Event-Related Menus and Options
How to Configure Individual Events
Options to
configure
individual events
You can configure individual events as follows:
•Use the evntlist.htm page. See
Event list access on this page.
•Use the
I2C
Configuration Utility on the MasterSwitch
CD
. You
edit a text file (.ini file,) convert that file to a binary configuration
file (.cfg file), and use the Management Card Wizard to send the
.cfg file to multiple Management Cards over the network. See
the Management Card Addendum on the MasterSwitch
CD
.
To configure the actions for events based on their default severity levels
instead of individually, see
Actions Option (Web Interface only) on page
29
.
Event list access
To access the event list, add /evntlist.htm to the Management Card’s
URL address value (
IP
address or
DNS
name). You cannot access the
event list directly from the Web interface menus.
For an
IP
address of
159.215.12.114
, and the default
TCP
port of
80
, the
URL
is:
http://159.215.12.114/evntlist.htm
For an IP address of
159.215.12.114
, and a
TCP
port other than
80
(in this example,
5000
), the
URL
is:
http://159.215.12.114:5000/evntlist.htm
For a
DNS
name of writers, the
URL
is:
http://writers/evntlist.htm
Event list format
The evntlist.htm page defines the following for each event:
Code: The event’s unique event code.
Description: The text used for the event.
Severity: The event’s default severity level.
Configuration: The hexadecimal code that defines the actions to
occur for the event and provides a link to the event mask that
you use to configure the event. See
Event mask settings on
page 34
.
Continued on next page