Filter
Top Products
UPS Network Management Card 2 User’s Guide80
Event Log, Temperature Units, Language, and
Logon Page
Path: Administration > General > Preferences
Color-code event log text
This option is disabled by default. Mark the Event Log Color Coding checkbox to enable color-coding
of alarm text recorded in the event log. System-event entries and configuration-change entries do not
change color.
Change the default temperature scale
Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in
this user interface.
Specify the UI language
You can specify the default language for the user interface with the Language field. This can be set
when you log on also. From the drop-down box, select one of the languages displayed.
Note: You can also specify different languages for e-mail recipients and SNMP trap
receivers. See “E-mail recipients” on page 73 and “Trap Receivers” on page 74.
Specify a default logon page
Configure the Web page that will display by default when you log on.
Text Color Alarm Severity
Red Critical: A critical alarm exists, which requires immediate action.
Orange Warning: An alarm condition requires attention and could jeopardize your data or equipment if
its cause is not addressed.
Green Alarm Cleared: The conditions that caused the alarm have improved.
Black Normal: No alarms are present. The Network Management Card and all connected devices are
operating normally.