APC AP9631 Network Card User Manual


 
79UPS Network Management Card 2 User’s Guide
Daylight saving
Path: Administration > General > Date & Time > daylight saving
Enable traditional United States Daylight Saving Time (DST), or enable and configure a customized
daylight saving time to match how Daylight Saving Time is implemented in your local area. DST is
disabled by default.
When customizing Daylight Saving Time (DST):
If the local DST always starts or ends on the fourth occurrence of a specific weekday of a month
(e.g, the fourth Sunday), choose Fourth/Last. If a fifth Sunday occurs in that month in a
subsequent year, the time setting still changes on the fourth Sunday.
If the local DST always starts or ends on the last occurrence of a specific weekday of a month,
whether it is the fourth or the fifth occurrence, choose Fifth/Last.
Format
Path: Administration > General > Date & Time > date format
Select the numerical format in which to display all dates in this user interface. In the selections, each
letter m (for month), d (for day), and y (for year) represents one digit. Single-digit days and months are
displayed with a leading zero.
Use an .ini File
Path: Administration > General > User Config File
Use the settings from one Management Card to configure another. Retrieve the config.ini file from the
configured Management Card, customize that file (e.g., to change the IP address), and upload the
customized file to the new Management Card. The file name can be up to 64 characters, and must have
the.ini suffix.
To retrieve and customize the file of a configured Management Card, see “How to Export
Configuration Settings” on page 86.
Instead of uploading the file to one Management Card, you can export the file to multiple Management
Cards by using an FTP or SCP script or a batch file and the APC .ini file utility, available from
www.apc.com/tools/download.
Status Reports the progress of the upload. The upload succeeds even if the file contains errors, but a
system event reports the errors in the event log.
Upload Browse to the customized file and upload it so that the current Management Card can use it to set
its own configuration.