Filter
Top Products
85UPS Network Management Card 2 User’s Guide
Configure or reconfigure the TCP/IP settings locally
1. Contact your network administrator to obtain valid TCP/IP settings.
2. Connect the provided serial configuration cable (APC part number 940-0299) from an available
communications port on your computer to the serial port of the Management Card or device.
Make sure no other application is using the computer port.
3. From the Start menu, launch the Wizard application.
4. If the Network Management Card or network-enabled device is not configured, wait for the
Wizard to detect it. Otherwise, click Next >.
5. Select Locally (through the serial port), and click Next >.
6. Enter the system IP, subnet mask, and default gateway for the Management Card or device, and
click Next >.
7. On the Transmit Current Settings Remotely screen, if you select Start a Web browser when
finished, the default Web browser connects to the Management Card or device after the Wizard
transmits the settings.
8. Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the
network, the Wizard prompts you to enter an IP address that is not in use. Enter a correct IP
address, and click Finish.
9. If you selected Start a Web browser when finished in step 6, you can now configure other
parameters through the Web interface of the Management Card or device.