Installation and Quick-Start Manual 3
Preliminary Information
New standard
features
The AP9617, AP9618, and AP9619 Management Cards
include the following new features:
• Generates system log (Syslog) messages
• Allows using a dynamic host configuration protocol
(DHCP) server to provide the TCP/IP values a Network
Management Card needs for network communication
Existing features All Network Management Cards still include the following
standard features:
• Detects 10/100
Mbps connection speeds
• Provides a data log accessible by
FTP or a Web browser
• Provides
UPS scheduling features
• Provides support for the
APC PowerChute Network
Shutdown utility
• Provides an event log which is accessible by Telnet,
FTP,
or a Web browser
• Generates Email notifications for
UPS or system events
• Limits
SNMP traps and Email notifications based on the
severity level of the events
• Allows using the
APC Management Card Wizard to
configure multiple Management Cards simultaneously
over the network
• Provides support for
APC Silcon UPS models
• Provides
UPS-specific application modules based on the
Management Card’s hardware platform, and the
application module’s
AP9618 features The AP9618 Network Management Card EM/MDM includes
the analog modem and Integrated Environmental Monitor
features described on page 4.
AP9619 features The AP9619 Network Management Card EM includes the
Integrated Environmental Monitor features described on page
4; the AP9619 does not include the analog modem feature.
