Filter
Top Products
[18]
2.3.2 Rear View
1. Uninterruptible Power Supply (UPS) Port (APC Smart UPS only)
The subsystem may come with an optional UPS port allowing you to connect a APC
Smart UPS device. Connect the cable from the UPS device to the UPS port located at
the rear of the subsystem. This will automatically allow the subsystem to use the
functions and features of the UPS.
2. RS232 Port
The subsystem is equipped with an RS232 serial port allowing you to connect a PC or
terminal. Use the null modem cable to
3. R-Link Port: Remote Link through RJ-45 Ethernet for remote management
The subsystem is equipped with one 10/100 Ethernet RJ45 LAN port. Use web browser
to manage the RAID subsystem through Ethernet for remote configuration and
monitoring.
4. LAN1 / LAN2 Gigabit Ports
The subsystem is equipped with two Gigabit data ports for connecting to the network.
5. Cooling Fan
One blower fan is located at the rear of the subsystem. It provides sufficient airflow
and heat dispersion inside the chassis. In case a fan fails to function, the “
” Fan
fail LED will turn red and an alarm will sound.
6. Power Switch
Use this to power on the system.