Filter
Top Products
[22]
1. Link to download the Microsoft iSCSI software initiator:
http://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-
4585-b385-befd1319f825&DisplayLang=en
Please refer to Appendix D for Microsoft iSCSI initiator installation procedure.
2. Linux iSCSI initiator is also available. For different kernels, there are different
iSCSI drivers. If you need the latest Linux iSCSI initiator, please visit Open-
iSCSI project for most update information. Linux-iSCSI (sfnet) and Open-iSCSI
projects merged in April 11, 2005.
Open-iSCSI website: http://www.open-iscsi.org/
Open-iSCSI README: http://www.open-iscsi.org/docs/README
Features: http://www.open-iscsi.org/cgi-bin/wiki.pl/Roadmap
Support Kernels: http://www.open-iscsi.org/cgi-
bin/wiki.pl/Supported_Kernels
Google groups: http://groups.google.com/group/open-iscsi/threads?gvc=2
http://groups.google.com/group/open-iscsi/topics
Open-iSCSI Wiki: http://www.open-iscsi.org/cgi-bin/wiki.pl
3. ATTO iSCSI initiator is available for Mac.
Website: http://www.attotech.com/xtend.html
2.8 Management Methods
There are three management methods to manage the iSCSI RAID subsystem, describe
in the following:
2.8.1 Web GUI
The iSCSI RAID subsystem supports graphical user interface to manage the
system. Be sure to connect LAN cable to your R-Link port. The default setting of
management port IP is DHCP and the DHCP address displays on LCM; user can
check LCM for the IP first, then open the browser and type the DHCP address:
(The DHCP address is dynamic and user may need to check every time after
reboot again.) When DHCP service is not available, the subsystem uses zero config
(Zeroconf) to get an IP address.
Example on LCM, the subsystem gets a DHCP address 192.168.10.50 from DHCP
server.
192.168.10.50
iSCSI-Model-Name ←