Filter
Top Products
SBP20K Series User Manual4
Installation
Stack configuration
Rack-mount configuration
Always place the SBP above the external battery packs and the UPS.
Four ornamental screws (supplied), must be used to secure each tie
bracket to the units, (see diagram).
Install rails in rack
For details on rail installation refer to the instructions included in the rail kit.
Install rack-mount brackets
Secure the brackets to the unit using eight
flat head screws (supplied).
Install cleats
Secure the cleats to the unit using eight
Pan head screws (supplied).
Install in rack
Always place the SBP above the external
battery packs and the UPS.
A cage nut and an ornamental screw
(supplied), must be used in the top hole
of each rack-mount bracket when
securing the unit in the rack.
The bottom hole of each rack-mount
bracket must be secured using an
ornamental screw (supplied), in the
threaded hole.
suo0689a
4x
4x
suo0690a
4x
4x
suo0696a
4x
4x
suo0691a
4x
7 holes
7 holes