Apple 280C Laptop User Manual


 
8 Turn on the PowerBook by pressing the power button.
After a few seconds a SCSI icon appears on the screen, showing the ID
number you assigned in step 3.
9 Turn on the other SCSI devices in the chain, if any.
10 Turn on the other computer.
The PowerBook appears as a hard disk icon on the screen of the computer
you connected it to. You can now transfer and use files as if the PowerBook
were an external disk drive.
WARNING
If you do not see the SCSI icon, and the PowerBook either
starts normally or displays an error message, choose Shut Down (if you
can) and then immediately disconnect your PowerBook from the SCSI
chain. Then go back and repeat steps 6 through 8.
(If you can’t choose Shut Down, try pressing the power button. If you
cannot shut down your PowerBook, disconnect your PowerBook from
the SCSI chain or you may lose information.)
106
Chapter 9