Filter
Top Products
To configure your AppleTalk network connection, follow these steps:
1Choose Control Panels from the Apple menu.
2Double-click the AppleTalk icon to open it.
The AppleTalk control panel opens.
3Move the pointer to the “Connect via” pop-up menu (if available), press and hold down
the mouse button to open the menu, and choose the port through which your computer
is connected to the network.
You can connect to an AppleTalk network through an Ethernet port, the
printer port, the modem port, or any other ports available on expansion cards
installed in your computer. Any additional ports appear automatically in this
pop-up menu.
Note: If you don’t see a pop-up menu here, this setting has been locked.
Contact your network administrator for assistance. (If you don’t have a
network administrator, you can use the Administration user mode to unlock
this setting. For more information about user modes, click the h button in the
AppleTalk control panel.)
4 Use the Current Zone pop-up menu (if available) to choose the zone you want.
If you don’t see a pop-up menu here, either your network has no zone, this
setting has been locked, or your network is not set up to allow you to choose
a zone. Zones are set up by the network administrator.
5Click the close box to close the AppleTalk control panel.
If you have made configuration changes, a message asks if you want to
save them.
82
Chapter 5