Filter
Top Products
Attaching the cables and connecting to the network
The Apple PCI Dual-Attached FDDI card requires one SC Duplex fiber cable
for single attachment or two cables for dual attachment. Note that each cable
has two connectors, as shown in the illustration that follows.
These cables are not supplied with the card but may be ordered in a variety of
lengths from most large computer suppliers.
Attach each cable to Port A or Port B on the FDDI card, following the cable
manufacturer’s instructions (if any). Looking at the computer from the back
(toward the logic module), as shown in the illustration that follows, Port A is
on the left.
A16 Chapter 1 / Installing the Card and Connecting to the Network