Filter
Top Products
If you have the Software Update CD
Follow these steps:
1Type
lslpp -l devices.mca.8ef4.com
In most cases a message appears telling you that the0 software is not installed.
Continue with step 2.
If a message appears telling you the software is present, then go to next
section, “Installing the FDDI AIX Driver.”
2 Insert the Network Server Software Update Kit CD in the CD drive.
3 To mount the CD, type the following command and press return:
mount -r -v cdrfs /dev/cd0 /mnt
4At the AIX prompt, type the following command and press return:
smitty devinst
The menu for installing additional device software appears.
5 In the “INPUT device/directory for software” field, type:
/mnt/new
6 In the “SOFTWARE to install” field, type:
devices.mca.8ef4.com
7Press Return.
A dialog box appears asking you to confirm the installation. Press Return to
begin the installation or press F3 (or ESC 3) to cancel the installation.
8 To unmount the CD, type:
umount /mnt
When the installation is finished, continue with the next section, “Installing the
FDDI AIX Driver.”
Installing the Common FDDI Software A21