Filter
Top Products
4Press Return to display the configuration options shown in the next screen:
5Type
devices.pci.7e100300
in the SOFTWARE to install field.
If a FDDI driver has already been installed and you want to continue with this
installation you need to type,
Yes in the overwrite field.
A dialog box appears asking you to confirm your selection.
6Press Return again to begin the installation.
Messages on the screen describe the installation process. When you see the
following message, installation is complete:
Installation Summary --------
Name Level Part Event Result
devices.pci.7e100300.rte 2.1.0.0 USR APPLY SUCCESS
devices.pci.7e100300.diag 2.1.0.0 USR APPLY SUCCESS
7Press f10 to exit SMITTY, and then reboot the Network Server.
Configuring the FDDI AIX device driver A23