Filter
Top Products
Opening the logic module of the Network Server
You do not need to remove the cover from the Network Server to install a card.
Instead you open the logic module, following the directions in this section.
1Shut down the Network Server.
See Using AIX, AppleTalk Services, and Mac OS Utilities on the Apple
Network Server if you need more information about safely shutting down the
Network Server.
2Attach a grounding strap to your body
A grounding strap is strongly recommended to avoid damage to the card or the
computer from electrostatic discharge.
3 Turn the key at the rear of the server to the Unlock position.
A8 Chapter 1 / Installing the Card and Connecting to the Network