Filter
Top Products
Installing a processor-direct slot (PDS) card
1 Remove the plastic access cover from the vertical plate.
2 Remove the processor-direct slot (PDS) expansion card from its static-proof bag.
Hold the card by its edges to avoid touching the connectors on the card.
3Align the card over the processor-direct slot.
4Press down on the card until the connector is solidly in place.
Don’t force the card. If you meet resistance, pull the card out and try again.
To see if the card is properly connected, lift it gently. If it resists and stays in
place, it’s connected.
Processor-direct slotPDS access port
Vertical plate
Squeeze the two plastic tabs together and pull off the
metal retainer so the access cover can come off.
Processor-direct slot
Vertical plate
Metal retainer
91
Installing an Expansion Card