Filter
Top Products
E-7
• Care of the power cord and plug
• Do not put the power cord near a heater.
Doing so could cause the sheath of the cable to melt down, resulting in fire or
electric shock.
• Do not connect or disconnect the power cord with wet hands. Doing so could
cause electric shock.
• Be sure to pull out the power cord and disconnect any cable connections
between units and release the anti-theft lock before moving the projector.
Moving the projector with cables connected may cause fire or electric shock if
the cables are damaged.
• If you do not plan to use the projector for a long time, disconnect the power
cord for safety.
• DO NOT REMOVE ANY SCREWS except the lamp cover screw and two lamp
unit screws. You could receive an electric shock.
What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your
dealer. Please save the original box and packing materials if you ever need to ship your
MP-50E Projector.
MP-50E Projector (1)
Remote control(1)
Power codes (2)
PC Signal cable (1)
Lens cap(1)
Batteries(2) (AA×2)
Documents:
User’s manual (1)
Three-pin type for U.S.A and Canada;
Two-pin type for Europe.
For North America
For Europe