Filter
Top Products
PowerBook G4 (17-inch) Take Apart - 93
Display Panel Assembly
13. Verify that the LVDS cable’s metal bead fits into the metal channel (rounded side up
so that its teeth secure it) and that the cable is secured into the channel along the right
speaker. Then, reconnect the LVDS cable and verify that it does not go over the fan.
14. To verify that the pop-up mechanism was installed correctly, first make sure there are
no wires or parts to interfere, then carefully close the display until it latches.
Push the display latch button and the display should pop-up slightly.
Note: If not, one or both limit stop feet, next to the clutch cleats, were not inserted
correctly. Loosen the screws for the end caps and clutch cleats enough to push the
feet into place and reinstall.