Filter
Top Products
" )
$
$$
$
$
#)
#) #)
#)
In this chapter we will discuss the physical installation of
NetPurifier and how to connect a browser to NetPurifier in
preparation for configuration.
Installation
Location
NetPurifier should be installed in a clean, dry location located
within near available hub/switch port of the network that is to be
filtered.
AC Power
Connect the supplied AC Power cord to the NetPurifier and a
properly grounded 115VAC outlet.
Network Connection
Connect either the supplied network cable (6ft) or your own
network cable between the NetPurifier’s network connector and a
port on your hub or switch. NetPurifier works on 10baseT and
100baseT networks.
Note: NetPurifier may be connected to any point in
the network as long as it is on the same subnet
as the network it will filter.