Filter
Top Products
)
/
!!
!!!!
!!
Network
Network Type - 10/100baseT
NetPurifier operates in a Network Address Translation mode
(NAT). In this mode only non-routable IP addresses are used
on the internal LAN (192.xxx.xxx.xxx).
Number of Computers
When used with it’s built in DHCP server, NetPurifier is
configured to allow access to up to 230 computers.
Typical Access Time
Access time per HTTP request is less than 20ms.
DHCP Requirements
NetPurifier is configured with an active DHCP server. The
scope is 192.168.1.10 to 192.168.1.249. 192.168.1.1 is
reserved for the Internet Gateway. 192.168.1.9 is reserved for
NetPurifier. 192.168.1.250-253 is reserved for wireless
devices that may be present on a network. The DHCP server
is easily disabled if an existing DHCP server is used. In this
case the existing DHCP server will need to redirect its DHCP
client’s gateway to NetPurifier.
Port Requirements
Port 80 for standard HTTP operation
Port 10000 for remote configuration