Filter
Top Products
" " )
%
%%
%
,
,,
,
DHCP Configuration
NetPurifier can operate in conjunction with an existing DHCP server
or with its own built-in DHCP server. In either case the key to the
successful operation of NetPurifier is a redirect of the Internet
Gateway IP address from the true Internet Gateway to NetPurifier.
This allows NetPurifier to sit between the requesting computer and
the true Internet Gateway.
Using an existing DHCP Server
If using an existing DHCP Server the following items must be
configured:
1. Set Net Purifiers DNS/Gateway setting to reflect your
networks IP Subnet.
2. Change your existing DHCP server to point client computers
to the NetPurifier IP (gateway)
Using the NetPurifier DHCP Server
NetPurifier has a built in DHCP server. It is factory configured but not
activated when shipped. If you use the NetPurifier DHCP server you
will need to modify the existing factory configuration to meet your
network parameters, save the configuration and Start the DHCP
server
Factory Configuration
Following are the factory settings for the DHCP server:
Scope 192.168.1.10 – 192.168.1.240
Subnet Mask 255.255.255.0
Default Router 192.168.1.9
Default Gateway 192.168.1.1
Broadcast Address 192.168.1.255
Lease Time 7 days