Filter
Top Products
Take Apart Front Hard Drive - 45
Replacement Note for
WS 9650 Only:
Depending
on what type of drive you
install (50-pin or 68-
pin) you will need to connect
either the 50-pin SCSI
cable or the Ultra Wide SCSI
cable to the drive. The
graphic at left shows the
routing of the two SCSI
cables in the WS 9650.
The internal hard disk drive (SCSI ID 0)
is connected to the Ultra Wide SCSI-3 bus.
One 5.25" Hard Disk Drive or two 3.5"Hard Disk Drives
can be installed on the floor of the server and
connected to the Ultra Wide SCSI-3 bus. (Some
Workgroup Server models come with a second Hard
Disk Drive [SCSI ID 1] installed here.)
SCSI
PCI
Card
Tape backup Drive
(optional)
CD-ROM Drive
Floppy Disk Drive
You can install a SCSI
device in this expansion
bay and connect it to the
Ultra Wide SCSI-3 bus.