Filter
Top Products
Troubleshooting Symptom Charts/Problems with Jack•Hammer Ultra SCSI Card
prepare to boot from a drive not connected to Ultra SCSI
bus).
• Shut down computer and disconnect all cables from PCI
SCSI JackHammer card.
• Restart computer while pressing Command-Option-J.
• Open Control Panel folder and hold down Command key
while double clicking on PCI SCSI JackHammer control
panel. If diagnostic points to problem with PCI SCSI
JackHammer card, replace JackHammer card.
You are unable to
successfully write
data, or data appears
corrupted when
viewed
1 Verify there are no duplicate SCSI IDs.
2 Make sure JackHammer is securely seated in its slot.
3 Open PCI SCSI JackHammer Control Panel and see if
JackHammer appears in scroll box. If not, conduct
JackHammer self-diagnosis as follows:
• Load CD-ROM system disc that came with WS 9650 (or
prepare to boot from a drive not connected to Ultra SCSI
bus).