Filter
Top Products
The Leader in Personal Storage32
To Reformat in Mac OS 10:
Caution: This will destroy any data on the hard drive. Backup any
data before you continue with the reformatting of the EZ Bus DTS
hard drive.
1 Make sure the EZ Bus DTS is plugged into the USB port. The drive
should appear as a drive on your desktop.
2. Open the “Applications” folder on your hard drive, go to the “Utilities”
folder and select Disk Utilities.
3. Select the drive from the list:
a. A description of the drive appears in the window.
b. Connection bus should be USB 2.0.
4. Select the
Erase
tab on the top of the window.
5. From the volume format drop down list, select the
Mac OS Extended
.
6. Enter EZ Bus DTS into the
Name
box.
7. Select the check box next to
Install Mac OS 9 Drivers
. This will allow
you to see your EZ Bus DTS hard drive if you boot to Mac OS 9.x
8. Click the
Erase
button: An alert will appear to conrm the erase
process.
9. Click the
Erase
button to start the formatting process.
10. To conrm that the EZ Bus DTS hard drive is properly formatted, Select
the EZ Bus DTS drive, then Select:
File, Get Info
. The format should
read Mac OS Extended.