Filter
Top Products
Preface
ARM DDI 0397G Copyright © 2006-2010 ARM. All rights reserved. viii
ID031010 Non-Confidential
monospace
Denotes a permitted abbreviation for a command or option. You can enter
the underlined text instead of the full command or option name.
monospace
italic
Denotes arguments to monospace text where the argument is to be
replaced by a specific value.
monospace
bold
Denotes language keywords when used outside example code.
< and > Enclose replaceable terms for assembler syntax where they appear in code
or code fragments. For example:
MRC p15, 0 <Rd>, <CRn>, <CRm>, <Opcode_2>
Signals
The signal conventions are:
Signal level The level of an asserted signal depends on whether the signal is
active-HIGH or active-LOW. Asserted means:
• HIGH for active-HIGH signals
• LOW for active-LOW signals.
Lower-case n At the start or end of a signal name denotes an active-LOW signal.
Additional reading
This section lists publications by ARM and by third parties.
See Infocenter, http://infocenter.arm.com, for access to ARM documentation.
ARM publications
This book contains information that is specific to this product. See the following documents for
other relevant information:
• AMBA
®
Network Interconnect (NIC-301) Integration Manual (ARM DII 0157)
• AMBA Network Interconnect (NIC-301) Implementation Guide (ARM DII 0222)
• AMBA Designer (ADR-301) User Guide (ARM DUI 0333)
• AMBA Network Interconnect (NIC-301) Supplement to AMBA Designer (ADR-301) User
Guide (ARM DSU 0003)
• AMBA AXI Protocol v1.0 Specification (ARM IHI 0022)
• AMBA 3 AHB-Lite Protocol v1.0 Specification (ARM IHI 0033)
• AMBA 3 APB Protocol v1.0 Specification (ARM IHI 0024)
• APB Rev E Specification (ARM IHI 0009).