Filter
Top Products
Mounting Configurations
Page 2-7
Desktop Mounting
To mount the Switch on a desktop or shelf:
1 Attach the four rubber feet (supplied) to the bottom of
each corner on the Switch. See Figure 2-9.
Figure 2-9 Desktop mounting
2 Place the Switch on a flat, stable, horizontal desktop or
shelf.
Make sure you allow enough ventilation space between the
Switch and surrounding objects.
The Switch is ready for network connections.
Rack Mounting
All 7000 Series Switches come with a rack-mounting kit and can be mounted in
a standard 19-inch equipment rack. This rack can be placed in a wiring closet
with other equipment.
To install the Switch in an equipment rack:
1 Attach the two mounting brackets (supplied) on each side
of the chassis. See Figure 2-10.
Figure 2-10 Attaching mounting brackets to the FS7000
87654321
161514131211109
Uplink
Norm
al
Uplink
MII
Power
Option Slot A Option Slot B
100/10Mbps
Full/Half
Link/Data
Power
FriendlyNET 7000 Series Gigabit Switch
12345678
910111213141516
100/10Mbps
Full/Half
Link/Data
A1A2A3A4A5A6A7A8
B1B2B3B4B5B6B7B8
Switched Gigabit Ethernet Port
Link/Data
Full Duplex/CollisionPower
Tx Rx
Switched Gigabit Ethernet Port
Link/Data
Full Duplex/CollisionPower
Tx Rx
87654321
161514131211109
Uplink
Normal
Uplink
MII
Power
Option Slot B
100/10Mbps
Full/Half
Link/Data
Power
FriendlyNET 7000 Series Gigabit Switch
12345678
910111213141516
100/10Mbps
Full/Half
Link/Data
A1A2A3A4A5A6A7A8
B1B2B3B4B5B6B7B8
Option Slot A
Switched Gigabit Ethernet Port
Link/Data
Full Duplex/Collision
Power
Tx Rx
Switched Gigabit Ethernet Port
Link/Data
Full Duplex/CollisionPower
Tx Rx
Rack-mount bracket