Filter
Top Products
Mounting Configurations
Page 2-7
Rack Mounting the FS4008DS
The FS4008DS comes with a rack-mounting kit.
▲ Important! The FS4004DS cannot be installed
in an equipment rack.
The FS4008DS can be mounted in a standard 19-inch equipment rack.
This rack can be placed in a wiring closet with other equipment.
To install the FS4008DS in an equipment rack:
1 Attach the two mounting brackets (supplied) on
each side of the FS4008DS. See Figure 2-6.
Figure 2-6 Attaching mounting brackets to the FS4008DS
2 Mount the FS4008DS in the equipment rack by
screwing the mounting brackets to the equipment
rack. See Figure 2-7.
Figure 2-7 Mounting the FS4008DS in an equipment rack
The FS4008DS rack mounting is complete. The
FS4008DS is ready for network connections.
1 2 3 4 5 6 7 8
Uplink
or
100Mbps
Link/Act
FDX / Col
Power
FS4008DS
FriendlyNet
8-port Dual Speed Ethernet Switch
1234
5
67
8
Switched 10/100Mbps Ports
1 2 3 4 5 6 7 8
Uplink
or
100Mbps
Link/Act
FDX / Col
Power
FS4008DS
FriendlyNet
8-port Dual Speed Ethernet Switch
1 2 345
67
8
Switched 10/100Mbps Ports
FRCH1Book Page 7 Thursday, September 25, 1997 11:23 AM