Filter
Top Products
5
Operating Manual - FR-8 and FR-16 Remote Level Controller
Mechanical Installation
The FR-8 and FR-16 are designed to be mounted to an electrical wall box or modular box array,
to any at surface using the provided cutout, or as a freestanding desktop controller.
The FR-16 will mount to a modular 7-gang US electrical box, with a minimum box depth of
2.25”. The FR-8 mounts to a 4-gang electrical box. For mounting to a wall or at surface without
using a wall box, a mechanical drawing and cutout pattern are provided in this manual on pages 9.
Fader and switch function labels can be created using the document template found on the
Ashly website and referenced in this manual on page 10.
Follow these instructions for mounting to an electrical wall box or surface:
Note: Remove power
before mounting. Avoid
static shock disruptions
to this or other connected
devices by mounting to an
earth-grounded metal wall
box or other earth grounded
point. This prevents static
discharge from owing
through the data lines.