Filter
Top Products
By default, the router’s WAN Connection Type is set to DHCP client as
shown. It should be used only if your ISP supports DHCP.
To apply any changes in the setting page, click the ‘Save & Restart’ button.
Static IP S
etup
If you have subscribed a permanent IP Address from your ISP, then you
must select Static IP and configure this particular settings page.
Your ISP will supply all the necessary information on all the fields for this
setup page. Please contact your ISP for the required information.
To apply any changes in the setting page, click the ‘Save & Restart’ button.
Asoka™ PlugLink™ PL Cable/DSL Router Manual
15