Filter
Top Products
2-92-9
2-92-9
2-9
ASUS VENTO 7700ASUS VENTO 7700
ASUS VENTO 7700ASUS VENTO 7700
ASUS VENTO 7700
2.5.22.5.2
2.5.22.5.2
2.5.2
Installing a Serial ATA hard disk driveInstalling a Serial ATA hard disk drive
Installing a Serial ATA hard disk driveInstalling a Serial ATA hard disk drive
Installing a Serial ATA hard disk drive
To install a
Serial ATA Serial ATA
Serial ATA Serial ATA
Serial ATA hard disk drive:
1. Follow steps 1 to 4 of section “2.5.1 Installing an IDE hard disk drive.”
2. Connect one end of the 7-pin
Serial ATA cable to the SATA
interface at the back of the
drive then connect the other
end to a SATA connector on
the motherboard.
Refer to the motherboard
user guide for the location
of the Serial ATA
connectors.
3. Connect the 15-pin SATA power plug from the PSU to the power
connector at the back of the drive.
- OR-- OR-
- OR-- OR-
- OR-
Connect a 4-pin (female)
power plug from the power
supply unit (PSU) to the 4-pin
(male) power connector at the
back of the drive.
2
3
3
Use either the 15-pin Serial ATA power connector
OROR
OROR
O R the legacy 4-pin
power connector.
DO NOTDO NOT
DO NOTDO NOT
D O NO T use both to prevent damage to components
and to keep the system from becoming unstable.