Filter
Top Products
2-26
Chapter 2: BIOS Setup
2.5.6 Hardware Monitor
Hardware Monitor
MB Temperature [33ªC/91ºF]
CPU Temperature [40.5ºC/102.5ºF]
CPU Fan Speed [3260RPM]
Chassis Fan Speed [N/A]
VCORE Voltage [ 1.504V]
3.3V Voltage [ 3.360V]
5V Voltage [ 5.160V]
12V Voltage [11.328V]
Smart Q-Fan Function [Disabled]
CPU Temperature
MB Temperature [xxx ºC/xxx ºF]
CPU Temperature [xxx ºC/xxx ºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Disabled if you do not wish to display
the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU and
chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, the specific field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
Smart Q-Fan Function [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the
fan speeds for more efficient system operation. When this field is set to [Enabled]
the following items appear. Configuration options: [Disabled] [Enabled]
The following items appear only when the Smart Q-Fan item is set to [Enabled].
Fan Auto Mode Start Voltage [5.0V]
Allows you to set the fan auto mode start voltage.
Configuration options: [4.0V] [2.5V] [5.0V] [5.5V] [6.0V]
Fan Auto Mode Start Speed Temp [25ºC]
Allows you to set the fan auto mode start speed temperature.
Configuration options: [25ºC] ~ [75ºC]