Filter
Top Products
2-18
Chapter 2: BIOS information
Onboard FDC Controller [Enabled]
This field allow you to enable the onboard FDC controller.
Configuration options: [Enabled] [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
These fields allow you to set the address for the onboard serial connector.
Configuration options: [3F8/IRQ4] [2F8/1RQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
[Disabled]
Onboard Parallel Port [378/IRQ7]
This field allows you to set the address of the onboard parallel port connector.
Configuration options: [378/IRQ7] [278/IRQ5] [3BC/1RQ7]
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [SPP] allows
normal-speed operation but in one direction only; [EPP] allows bidirectional parallel
port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode;
[ECP+EPP] allows normal speed operation in a two-way mode.
Configuration options: [EPP] [ECP] [SPP] [ECP+EPP]
ECP Mode USE DMA [3]
This field sets the parallel port DMA channel for the selected ECP mode. The
default setting is 3. This selection is available only if you select [ECP] or
[ECP+EPP] in the Parallel Port Mode item. Configuration options: [1] [3]
EPP Mode Select [EPP1.7]
This field sets the EPP mode. The default setting is EPP1.7. This selection is
available only if you select [EPP] or [ECP+EPP] in the Parallel Port Mode item.0
Configuration options: [EPP1.7] [EPP1.9]
2.5.2 I/O Device Configuration
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP+EPP]
ECP Mode USE DMA [3]
EPP Mode Select [EPP1.7]
VIA-3058 AC97 Audio [Auto]
Onboard LAN [Auto]
Onboard LAN Boot ROM [Disabled]
Game Port Address [201]
MIDI Port Address [330]
MIDI Port IRQ [10]
I/O Device Configuration
F1 : Help
↑↓
: Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit
→←
: Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help